[Cube] Target disk mode - another update

[Gary Heartsfield]

Hope your not running the hub with multiple computers at the same time  
with a connected drive ?

If you are and it works, ? I need to do the same thing.

I have target disk mode my cube to every machine I have owned since  
the cube.  ( lots of times )

Good luck

Gary H





On Nov 1, 2007, at 1:45 PM, Riba wrote:

>
> On Nov 1, 2007, at 18:23, Rod Duncan wrote:
>
>>> an 2.1GHz Intel iMac and have no trouble mounting the Cube onto  
>>> the iMac and Powerbook to the iMac so must see if the Cube will  
>>> mount on the Powerbook. Think it does - not sure when last I did  
>>> it. Am also running a 6-port firewire hub and use an external  
>>> Pioneer 110D Superdrive as a common drive to both the Cube and  
>>> iMac. So... off to the office to see if I can mount the iMac and  
>>> Cube via TDM on the Powerbook. All computers are running 10.4.10.  
>>> Will post results.
>>> Rod
>>
>> Everything mounts perfectly on the AI Powerbook. Not only did the  
>> Cube mount in TDM but also the iMac and 4 external FW drives. All  
>> at the same time. Twelve partitions total. Both the iMac and the  
>> Cube(TesserAct) have only a single partition.
>
> I guess that something may be broken on Powerbook...but the firewire  
> port is working for example when I connect the external burner to  
> it. I tired to reset open firmware, but it did not help.
>
> _______________________________________________
> Cube mailing list
> Cube at listserver.themacintoshguy.com
> http://listserver.themacintoshguy.com/mailman/listinfo/cube