From darrin at djs.to Fri Feb 1 09:33:38 2008 From: darrin at djs.to (Darrin Smart) Date: Fri Feb 1 09:34:22 2008 Subject: [Cube] Cube for sale (United Kingdom) Message-ID: <26209D87-85A4-49E8-96CC-51E85EF520B7@djs.to> Hi Everyone, Well, after 6+ years of being a happy cube owner, I am moving to a new country and the time has come to sell my cube. If anyone in London is interested, the cube and cinema display are on ebay, there is only a couple of days left in the auction. Cube: http://tinyurl.com/3do4t2 Monitor: http://tinyurl.com/3cdz6n It also means that its time for me to leave this list. I would like to thank everyone who has participated over the years, the excellent information I've got here and at cubeowner has enabled me to keep my cube running beautifully over the years. Darrin From almiroty at prtc.net Sun Feb 10 19:13:48 2008 From: almiroty at prtc.net (=?ISO-8859-1?Q?gladys_p=E9rez-almiroty?=) Date: Sun Feb 10 19:14:53 2008 Subject: [Cube] question Message-ID: hi: i am in the process of upgrading the processor of my cube for the first time and i was wondering if i can run it w/out the ethernet card and modem card. i don't use the and i wondered if the extra little space would help with airflow. thanks for the help gladys From almiroty at prtc.net Sun Feb 10 22:08:37 2008 From: almiroty at prtc.net (=?ISO-8859-1?Q?gladys_p=E9rez-almiroty?=) Date: Sun Feb 10 22:09:04 2008 Subject: [Cube] first impresions Message-ID: hi, again: i finishes the installation of the processor card pretty fast. i didn't note time, but i started after tina turner was on the grammy's and finished before andrea bocelli was on. not too bad for a fist time. the worst part were a couple of stuck screws that took quite a while to get out. the computer recognizes the new processor as 1.4 ghz w/ 2mb L3cache. now the problem is the dvd drive. i tried to upgrade to 10.5, the disk was found dirty and i tried to eject it, but could not. i tried pressing the eject lever. nothing happened. i took the cube out of the plastic housing and the top plate off and tried again, but nothing. any ideas? thanks g From mindstage at gmail.com Mon Feb 11 03:31:16 2008 From: mindstage at gmail.com (Steve Cook) Date: Mon Feb 11 03:33:35 2008 Subject: [Cube] first impresions In-Reply-To: References: Message-ID: <9cf9b8dd0802110331r62ba43feuc484de261cc9da4d@mail.gmail.com> On Feb 11, 2008 1:08 AM, gladys p?rez-almiroty wrote: > hi, again: > i finishes the installation of the processor card pretty fast. i > didn't note time, but i started after tina turner was on the grammy's > and finished before andrea bocelli was on. not too bad for a fist > time. the worst part were a couple of stuck screws that took quite a > while to get out. > the computer recognizes the new processor as 1.4 ghz w/ 2mb L3cache. > now the problem is the dvd drive. i tried to upgrade to 10.5, the disk > was found dirty and i tried to eject it, but could not. i tried > pressing the eject lever. nothing happened. i took the cube out of the > plastic housing and the top plate off and tried again, but nothing. > any ideas? > thanks > g > _______________________________________________ > Cube mailing list > Cube@listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listserver.themacintoshguy.com/pipermail/cube/attachments/20080211/e8b85292/attachment.html From mindstage at gmail.com Mon Feb 11 03:33:04 2008 From: mindstage at gmail.com (Steve Cook) Date: Mon Feb 11 03:33:46 2008 Subject: [Cube] first impresions In-Reply-To: References: Message-ID: <9cf9b8dd0802110333j1e251e8r9aa47b4430d0251e@mail.gmail.com> Try holding down the mouse (if Apple Pro, or mouse buttons if not) then starting the Cube. That's the Mac command to eject on startup. On Feb 11, 2008 1:08 AM, gladys p?rez-almiroty wrote: > hi, again: > i finishes the installation of the processor card pretty fast. i > didn't note time, but i started after tina turner was on the grammy's > and finished before andrea bocelli was on. not too bad for a fist > time. the worst part were a couple of stuck screws that took quite a > while to get out. > the computer recognizes the new processor as 1.4 ghz w/ 2mb L3cache. > now the problem is the dvd drive. i tried to upgrade to 10.5, the disk > was found dirty and i tried to eject it, but could not. i tried > pressing the eject lever. nothing happened. i took the cube out of the > plastic housing and the top plate off and tried again, but nothing. > any ideas? > thanks > g > _______________________________________________ > Cube mailing list > Cube@listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listserver.themacintoshguy.com/pipermail/cube/attachments/20080211/ef7044c2/attachment.html From luis_meleiro at cilsp.com Mon Feb 11 04:17:23 2008 From: luis_meleiro at cilsp.com (Luis Meleiro) Date: Mon Feb 11 04:18:50 2008 Subject: [Cube] first impresions - Ejecting media in Mac OS X: Removing 'stuck' CDs/DVDs In-Reply-To: <47B039E2.0EDB.0092.0@cilsp.com> References: <9cf9b8dd0802110333j1e251e8r9aa47b4430d0251e@mail.gmail.com> <47B039E2.0EDB.0092.0@cilsp.com> Message-ID: <47B03C88.0EDB.0092.0@cilsp.com> 1. Use Disk Utility to eject. The first and simplest method, if you only want to unmount a single volume on the disk, is to use Disk Utility, located in Applications/Utilities. In Disk Utility, simply select the volume you want to unmount and click Eject. 2. Hold Down the mouse button at startup. In some cases holding down a connected mouse button at startup will cause a misbehaving optical drive to eject its media Unfortunately, this method will not work if you are using a Bluetooth keyboard. Also, for Xserve users, make sure that the machine is unlocked (using the included allen wrench) before holding down the mouse key during startup 3. Boot into Open Firmware and eject. If you have a Mac that will not startup properly and has a stuck disc, try booting into Open Firmware by holding down Command, Option, O key and F key during startup. After booting into Open Firmware, type the command - eject-cd - 4. Using the Terminal. There are two commands that can be used in the Terminal (located in Applications/Utilities) which can be used to force disk ejection: The first command to try is - drutil tray eject -. Simply type in this command and press return. The other method takes a little more work but can work in instances where the first method fails. a) Type the command - drutil list - into the Terminal and press return. This will provide a list of all currently connected removable devices. b) Use the command - drutil tray eject 1 -.The number 1 should be replaced with whatever drive number you obtained in the first step. 5. Enabling an Eject menu. As a side note, you can enable another means of ejecting disks by opening the folder System/Library/CoreServices/Menu Extras and double-clicking the file Eject.menu. An eject icon will appear in the menubar that can be used to close and open selected optical drives. source: macfixit.com | Good luck, LM ] -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listserver.themacintoshguy.com/pipermail/cube/attachments/20080211/4aee46b9/attachment-0001.html From slick.willy at gmail.com Mon Feb 11 04:31:50 2008 From: slick.willy at gmail.com (bill gates) Date: Mon Feb 11 04:32:57 2008 Subject: [Cube] first impresions - Ejecting media in Mac OS X: Removing 'stuck' CDs/DVDs In-Reply-To: <47B03C88.0EDB.0092.0@cilsp.com> References: <9cf9b8dd0802110333j1e251e8r9aa47b4430d0251e@mail.gmail.com> <47B039E2.0EDB.0092.0@cilsp.com> <47B03C88.0EDB.0092.0@cilsp.com> Message-ID: <5ffcafc20802110431t379ef982jb220d814e931d03a@mail.gmail.com> First, the manual eject on a cube isn't a lever. It is an electrical switch. Are you sure you contacted it? Second, I have sometimes been able to eject a stuck disk by using Toast, even when Disk Utility doesn't even see that it is there. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listserver.themacintoshguy.com/pipermail/cube/attachments/20080211/e460d685/attachment.html From slick.willy at gmail.com Mon Feb 11 04:52:20 2008 From: slick.willy at gmail.com (bill gates) Date: Mon Feb 11 04:54:01 2008 Subject: [Cube] first impresions - Ejecting media in Mac OS X: Removing 'stuck' CDs/DVDs In-Reply-To: <5ffcafc20802110431t379ef982jb220d814e931d03a@mail.gmail.com> References: <9cf9b8dd0802110333j1e251e8r9aa47b4430d0251e@mail.gmail.com> <47B039E2.0EDB.0092.0@cilsp.com> <47B03C88.0EDB.0092.0@cilsp.com> <5ffcafc20802110431t379ef982jb220d814e931d03a@mail.gmail.com> Message-ID: <5ffcafc20802110452r3807faaahfc8a288c0257fa68@mail.gmail.com> Too quick on the trigger. Third, I believe drutil will only work if the disk is in a burner. diskutil should work on a non-burning drive. Find out the device name (System Profiler is the easiest way), and use, in a terminal: diskutil unmount /dev/diskX (probably 1 or 2) diskutil eject /dev/diskX -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listserver.themacintoshguy.com/pipermail/cube/attachments/20080211/2f62ec12/attachment.html From pw at tr3a.co.uk Mon Feb 11 08:22:42 2008 From: pw at tr3a.co.uk (Peter Wigglesworth) Date: Mon Feb 11 08:23:42 2008 Subject: [Cube] Very Useful - Thanks Message-ID: <47B07652.8070102@tr3a.co.uk> Thank you for the recent email threads on disc ejection. I do not have the problem but am happy to have this sort of info stored in my files Thanks again Peter W From almiroty at prtc.net Mon Feb 11 16:42:31 2008 From: almiroty at prtc.net (=?ISO-8859-1?Q?gladys_p=E9rez-almiroty?=) Date: Mon Feb 11 16:43:15 2008 Subject: [Cube] bad news, i think Message-ID: <771B37CB-8A2A-4676-99EE-9B57CAB64D38@prtc.net> hi: my newly upgraded cube suddenly shut down and i heard a faint pop and a burnt smell. i haven't had the heart to try to boot. i just turned the battery off. i upgraded yesterday to a gigadesign 1.4 mghz processor upgrade. i made sure the jumpers were in the correct position and followed the instructions to the letter. i even had an external fan pointed at it. when this happened i was downloading 10.5.2. any ideas, suggestions, comments? gladys From jmyers0341 at gmail.com Mon Feb 11 16:53:05 2008 From: jmyers0341 at gmail.com (Jason Myers) Date: Mon Feb 11 16:53:35 2008 Subject: [Cube] bad news, i think In-Reply-To: <771B37CB-8A2A-4676-99EE-9B57CAB64D38@prtc.net> References: <771B37CB-8A2A-4676-99EE-9B57CAB64D38@prtc.net> Message-ID: <25BCDC3E-5EB7-4126-A90B-7D245403702B@gmail.com> I had the same thing happen to me... I installed a graphics card (flashed nvidia 6200, I believe), turned it on, heard a pop, felt sad, wrapped it up and it has been in the closet ever since :( Over a year now! So sad... On Feb 11, 2008, at 4:42 PM, gladys p?rez-almiroty wrote: > hi: my newly upgraded cube suddenly shut down and i heard a faint > pop and a burnt smell. i haven't had the heart to try to boot. i > just turned the battery off. > i upgraded yesterday to a gigadesign 1.4 mghz processor upgrade. i > made sure the jumpers were in the correct position and followed the > instructions to the letter. i even had an external fan pointed at > it. when this happened i was downloading 10.5.2. > any ideas, suggestions, comments? > gladys > _______________________________________________ > Cube mailing list > Cube@listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube From almiroty at prtc.net Mon Feb 11 16:58:12 2008 From: almiroty at prtc.net (=?ISO-8859-1?Q?gladys_p=E9rez-almiroty?=) Date: Mon Feb 11 16:58:47 2008 Subject: [Cube] bad news, i think In-Reply-To: <25BCDC3E-5EB7-4126-A90B-7D245403702B@gmail.com> References: <771B37CB-8A2A-4676-99EE-9B57CAB64D38@prtc.net> <25BCDC3E-5EB7-4126-A90B-7D245403702B@gmail.com> Message-ID: <7F6C9F51-5161-46DB-B5A2-9A3338801EBB@prtc.net> that is not very encouraging ;-( On Feb 11, 2008, at 8:53 PM, Jason Myers wrote: > I had the same thing happen to me... I installed a graphics card > (flashed nvidia 6200, I believe), turned it on, heard a pop, felt > sad, wrapped it up and it has been in the closet ever since :( Over > a year now! So sad... > From jamz2xcite at gmail.com Mon Feb 11 19:36:24 2008 From: jamz2xcite at gmail.com (Jamison Koczan) Date: Mon Feb 11 19:36:39 2008 Subject: [Cube] Cube 500 For Sale, Message-ID: <476ccbb20802111936r29f6215dt8fb0ef6f004f7da3@mail.gmail.com> I have a Cube 500 for sale, http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=150215149465&ssPageName=STRK:MESE:IT&ih=005 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listserver.themacintoshguy.com/pipermail/cube/attachments/20080211/445b6770/attachment.html From almiroty at prtc.net Mon Feb 11 19:56:02 2008 From: almiroty at prtc.net (=?ISO-8859-1?Q?gladys_p=E9rez-almiroty?=) Date: Mon Feb 11 19:56:22 2008 Subject: [Cube] vrm Message-ID: hi to all: apparently i blew the vrm board after the cpu upgrade, but have no way to test it. my option seems to be to buy one. if anybody has one for sale, please, please... also, if any of you is willing to lend me a helping hand with this problem, i'd appreciate it. thanks in advanced gladys From pfterry at deadtrees.net Mon Feb 11 20:49:00 2008 From: pfterry at deadtrees.net (Fred Terry) Date: Mon Feb 11 20:49:18 2008 Subject: [Cube] vrm In-Reply-To: Message-ID: Gladys, Two sellers have vrm boards listed on eBay for $59.00 and $29.00. You could buy one from http://welovemacs.com, but they are selling them for $169.00. HTH, pf On 2/11/08 9:56 PM, "gladys p?rez-almiroty" wrote: > hi to all: > apparently i blew the vrm board after the cpu upgrade, but have no way > to test it. my option seems to be to buy one. > if anybody has one for sale, please, please... > also, if any of you is willing to lend me a helping hand with this > problem, i'd appreciate it. > thanks in advanced > gladys > _______________________________________________ > Cube mailing list > Cube@listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube From almiroty at prtc.net Mon Feb 11 21:42:07 2008 From: almiroty at prtc.net (=?ISO-8859-1?Q?gladys_p=E9rez-almiroty?=) Date: Mon Feb 11 21:43:06 2008 Subject: [Cube] vrm In-Reply-To: References: Message-ID: <7D3C5B21-A63E-4D34-B361-92E9C19BB611@prtc.net> fred: i was looking at apple g 4 cube, but nothing came up. thank you so much!! g On Feb 12, 2008, at 12:49 AM, Fred Terry wrote: > Gladys, > > Two sellers have vrm boards listed on eBay for $59.00 and $29.00. > You could > buy one from http://welovemacs.com, but they are selling them for > $169.00. > > HTH, > pf > > From pfterry at deadtrees.net Mon Feb 11 21:56:28 2008 From: pfterry at deadtrees.net (Fred Terry) Date: Mon Feb 11 21:56:45 2008 Subject: [Cube] vrm In-Reply-To: <7D3C5B21-A63E-4D34-B361-92E9C19BB611@prtc.net> Message-ID: Gladys, I actually found them on eBay by googling. ;-) pf On 2/11/08 11:42 PM, "gladys p?rez-almiroty" wrote: > fred: > i was looking at apple g 4 cube, but nothing came up. thank you so > much!! > g > On Feb 12, 2008, at 12:49 AM, Fred Terry wrote: > >> Gladys, >> >> Two sellers have vrm boards listed on eBay for $59.00 and $29.00. >> You could >> buy one from http://welovemacs.com, but they are selling them for >> $169.00. >> >> HTH, >> pf >> >> > _______________________________________________ > Cube mailing list > Cube@listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube From caubineau at sigma.fr Tue Feb 12 00:01:06 2008 From: caubineau at sigma.fr (AUBINEAU Cyril) Date: Tue Feb 12 00:02:27 2008 Subject: [Cube] vrm In-Reply-To: <7D3C5B21-A63E-4D34-B361-92E9C19BB611@prtc.net> Message-ID: <8869DACDFD621A4E9905A9D184F9BA0315D537@gsw3mes2.groupesigma.fr> Hello Gladys, I have a VRM board (apple original part) to sell. Asking 45 euros. Where are you living ? Cyril -----Message d'origine----- De : cube-bounces@listserver.themacintoshguy.com [mailto:cube-bounces@listserver.themacintoshguy.com]De la part de gladys p?rez-almiroty Envoy? : mardi 12 f?vrier 2008 06:42 ? : A place to discuss Apple's Cube. Objet : Re: [Cube] vrm fred: i was looking at apple g 4 cube, but nothing came up. thank you so much!! g On Feb 12, 2008, at 12:49 AM, Fred Terry wrote: > Gladys, > > Two sellers have vrm boards listed on eBay for $59.00 and $29.00. > You could > buy one from http://welovemacs.com, but they are selling them for > $169.00. > > HTH, > pf > > _______________________________________________ Cube mailing list Cube@listserver.themacintoshguy.com http://listserver.themacintoshguy.com/mailman/listinfo/cube From geordiep at blueyonder.co.uk Tue Feb 12 00:48:01 2008 From: geordiep at blueyonder.co.uk (George Paterson) Date: Tue Feb 12 00:48:46 2008 Subject: [Cube] Upgraded Cube for sale UK Message-ID: <740109A8-61E7-488C-8991-1A03E83DF54D@blueyonder.co.uk> Hi there, Another Cube for sale, upgraded to 1.2 GHz, sorry UK only: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=260210589302&ssPageName=STRK:MESE:IT&ih=016 Also got a 17" ADC Studio display for sale: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=260210585650&ssPageName=STRK:MESE:IT&ih=016 Again UK only. Cheers the_jorde -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listserver.themacintoshguy.com/pipermail/cube/attachments/20080212/bd98b92c/attachment.html From danpinto at cox.net Tue Feb 12 04:05:20 2008 From: danpinto at cox.net (Daniel A Pinto) Date: Tue Feb 12 04:06:03 2008 Subject: [Cube] vrm In-Reply-To: References: Message-ID: <5FE69D5E-CBF5-424E-97A8-C822EE462FCE@cox.net> I have one. Dan On Feb 11, 2008, at 10:56 PM, gladys p?rez-almiroty wrote: hi to all: apparently i blew the vrm board after the cpu upgrade, but have no way to test it. my option seems to be to buy one. if anybody has one for sale, please, please... also, if any of you is willing to lend me a helping hand with this problem, i'd appreciate it. thanks in advanced gladys _______________________________________________ Cube mailing list Cube@listserver.themacintoshguy.com http://listserver.themacintoshguy.com/mailman/listinfo/cube From pfterry at deadtrees.net Tue Feb 12 05:45:31 2008 From: pfterry at deadtrees.net (Fred Terry) Date: Tue Feb 12 05:47:08 2008 Subject: [Cube] Larger hard drives Message-ID: Fellow Cubists, My 120Gb Maxtor drive died a month ago and I replaced it with 320Gb Western Digital drive that I had in an external firewire case. Before I installed the drive in my Cube, I created two partitions on it, one 128Gb and the other 192Gb. Though I had never had any problems with this drive, after installing Leopard, I noticed the SMART status indicated the drive was failing. When I checked the attributes, I discovered a block reallocation error on the second partition. Here's my question. Is the only way to partition and use a larger capacity drive in the Cube by running the SpeedTools Hi-Cap driver? I thought it would be enough to partition the disk before I installed it. I suppose the drive could be failing..... Thanks in advance for any advice you can offer. pf From riba at ml1.net Tue Feb 12 06:27:02 2008 From: riba at ml1.net (Riba) Date: Tue Feb 12 06:28:27 2008 Subject: [Cube] Larger hard drives In-Reply-To: References: Message-ID: > Here's my question. Is the only way to partition and use a larger > capacity > drive in the Cube by running the SpeedTools Hi-Cap driver? I thought > it > would be enough to partition the disk before I installed it. I > suppose the > drive could be failing..... It is not enough to partition the drive, you must use the hi-cap driver. I guess this explains the reported failure as well. From luis_meleiro at cilsp.com Tue Feb 12 06:38:53 2008 From: luis_meleiro at cilsp.com (Luis Meleiro) Date: Tue Feb 12 06:39:47 2008 Subject: [Cube] Larger hard drives In-Reply-To: References: Message-ID: <47B1AF32.0EDB.0092.0@cilsp.com> Fred: the following info might be helpful... - What size hard drive can I install in my Cube? - Support for Hard Drives over 128GB in Cube, ....without using Intech Hi-Cap Good luck, LM >>>On Tue, 12 de Feb de 2008 at 13:45, Fred Terry wrote: Here's my question. Is the only way to partition and use a larger capacity drive in the Cube by running the SpeedTools Hi-Cap driver? I thought it would be enough to partition the disk before I installed it. I suppose the drive could be failing..... ] -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listserver.themacintoshguy.com/pipermail/cube/attachments/20080212/4845cbdc/attachment.html From pfterry at deadtrees.net Tue Feb 12 06:43:09 2008 From: pfterry at deadtrees.net (Fred Terry) Date: Tue Feb 12 06:43:26 2008 Subject: [Cube] Larger hard drives In-Reply-To: <47B1AF32.0EDB.0092.0@cilsp.com> Message-ID: Luis, Thank you very much. That is the technical information I was looking for. pf On 2/12/08 8:38 AM, "Luis Meleiro" wrote: > > Fred: the following info might be helpful... > > > - What size hard drive can I install in my Cube? > > > > > > - Support for Hard Drives over 128GB in Cube, ....without using Intech Hi-Cap > > > > > > Good luck, > > LM > >>>> >>>On Tue, 12 de Feb de 2008 at 13:45, Fred Terry >>>> wrote: > > Here's my question. Is the only way to partition and use a larger capacity > drive in the Cube by running the SpeedTools Hi-Cap driver? I thought it > would be enough to partition the disk before I installed it. I suppose the > drive could be failing..... > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listserver.themacintoshguy.com/pipermail/cube/attachments/20080212/933e6b46/attachment.html From macstonelson at yahoo.com Wed Feb 13 16:04:14 2008 From: macstonelson at yahoo.com (Da Pen) Date: Wed Feb 13 16:06:21 2008 Subject: [Cube] OT - powerpoint preso? Message-ID: <930121.45722.qm@web32011.mail.mud.yahoo.com> Howdy, I've got a friend trying to send me a powerpoint preso done on Windows - is there anyway to view without buying a program? Thanks. D. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs From andrew.mckenzie at onlinecol.com Wed Feb 13 16:12:40 2008 From: andrew.mckenzie at onlinecol.com (Andrew McKenzie) Date: Wed Feb 13 16:13:35 2008 Subject: [Cube] OT - powerpoint preso? In-Reply-To: <930121.45722.qm@web32011.mail.mud.yahoo.com> References: <930121.45722.qm@web32011.mail.mud.yahoo.com> Message-ID: Keynote might (should) be able to open it.. Andrew On Feb 13, 2008, at 5:04 PM, Da Pen wrote: Howdy, I've got a friend trying to send me a powerpoint preso done on Windows - is there anyway to view without buying a program? Thanks. D. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs _______________________________________________ Cube mailing list Cube@listserver.themacintoshguy.com http://listserver.themacintoshguy.com/mailman/listinfo/cube From jmyers0341 at gmail.com Wed Feb 13 16:26:11 2008 From: jmyers0341 at gmail.com (Jason Myers) Date: Wed Feb 13 16:26:28 2008 Subject: [Cube] OT - powerpoint preso? In-Reply-To: References: <930121.45722.qm@web32011.mail.mud.yahoo.com> Message-ID: <43B78A79-7351-425C-A3C1-DF0F4E601735@gmail.com> openoffice.org - even though this wasn't cube related... Here IS something cube related: While I have everyone on the line, I am getting ready to sell my cube with a bad VRM... 120gb drive, 1gb RAM, stock vid card and a tested flashed nVidia geforce 6200, case, speakers, Griffin iMic USB speaker adapter, original KB, mouse, software, currently running 10.4 w/ Office 2004. Make me an offer! On Feb 13, 2008, at 4:12 PM, Andrew McKenzie wrote: > Keynote might (should) be able to open it.. > > Andrew > > On Feb 13, 2008, at 5:04 PM, Da Pen wrote: > > Howdy, > I've got a friend trying to send me a powerpoint preso > done on Windows - is there anyway to view without > buying a program? > Thanks. D. > > > > ____________________________________________________________________________________ > Never miss a thing. Make Yahoo your home page. > http://www.yahoo.com/r/hs > _______________________________________________ > Cube mailing list > Cube@listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube > > _______________________________________________ > Cube mailing list > Cube@listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube From frederix9 at sympatico.ca Wed Feb 13 16:28:15 2008 From: frederix9 at sympatico.ca (Frederick Manter) Date: Wed Feb 13 16:30:42 2008 Subject: [Cube] OT - powerpoint preso? In-Reply-To: <930121.45722.qm@web32011.mail.mud.yahoo.com> References: <930121.45722.qm@web32011.mail.mud.yahoo.com> Message-ID: I think you can go to the powerpoint website and download a free program that allows you to read only, not write or save etc. Cheers... On 13-Feb-08, at 7:04 PM, Da Pen wrote: > Howdy, > I've got a friend trying to send me a powerpoint preso > done on Windows - is there anyway to view without > buying a program? > Thanks. D. > > > > ______________________________________________________________________ > ______________ > Never miss a thing. Make Yahoo your home page. > http://www.yahoo.com/r/hs > _______________________________________________ > Cube mailing list > Cube@listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube From andrewaa at comcast.net Wed Feb 13 17:47:04 2008 From: andrewaa at comcast.net (AndrewAA) Date: Wed Feb 13 17:47:04 2008 Subject: [Cube] OT - powerpoint preso? Message-ID: <135F851C-3713-4204-A617-F5D1B6C43939@comcast.net> > I've got a friend trying to send me a powerpoint preso > done on Windows - is there anyway to view without > buying a program? > I've had good luck with Neo Office. Kind of slow and clunky but it does work. Andrew in Ann Arbor From rroberts91 at cox.net Wed Feb 13 18:49:37 2008 From: rroberts91 at cox.net (Robert Roberts) Date: Wed Feb 13 18:52:01 2008 Subject: [Cube] Re: Powerpoint presentation In-Reply-To: <20080214001350.B7230D37472@listserver.themacintoshguy.com> References: <20080214001350.B7230D37472@listserver.themacintoshguy.com> Message-ID: <7651BDE2-53C4-439B-99EB-32015F1F1FD0@cox.net> Da Pen, Try http://tinyurl.com/2cosxp and download Windows Media Player 9 for Mac OS if you are using System X. If System 9, download Windows Media Player 7.1 Bob >Howdy, I've got a friend trying to send me a powerpoint preso done on Windows - is there anyway to view without buying a program? >Thanks. D. From almiroty at prtc.net Fri Feb 15 10:54:30 2008 From: almiroty at prtc.net (=?ISO-8859-1?Q?gladys_p=E9rez-almiroty?=) Date: Fri Feb 15 10:54:51 2008 Subject: [Cube] update on sad cube Message-ID: <2FA72D01-4AA2-4544-AC1E-24F2A03F2CE0@prtc.net> hi to all: i have been unable to test the vrm, cpu or video card, but i was able to test the PSU. thanks to Dave Kuebler, who explained how to do it, i found out that the out put is 16.9, not good news. for starters, i need a new PSU, and once i have that i can start testing the components. if anybody has a good PSU for sale, please lml thanks to all you have been helping me figure out what is wrong with my cube. g From almiroty at prtc.net Fri Feb 15 11:10:33 2008 From: almiroty at prtc.net (=?ISO-8859-1?Q?gladys_p=E9rez-almiroty?=) Date: Fri Feb 15 11:11:14 2008 Subject: [Cube] vrm In-Reply-To: <8869DACDFD621A4E9905A9D184F9BA0315D537@gsw3mes2.groupesigma.fr> References: <8869DACDFD621A4E9905A9D184F9BA0315D537@gsw3mes2.groupesigma.fr> Message-ID: cyril: thanks for the offer, but by the time i got it i had already bought it from ebay. i live in Puerto Rico g On Feb 12, 2008, at 4:01 AM, AUBINEAU Cyril wrote: > Hello Gladys, > > I have a VRM board (apple original part) to sell. > Asking 45 euros. > Where are you living ? > > Cyril > > -----Message d'origine----- > De : cube-bounces@listserver.themacintoshguy.com > [mailto:cube-bounces@listserver.themacintoshguy.com]De la part de > gladys > p?rez-almiroty > Envoy? : mardi 12 f?vrier 2008 06:42 > ? : A place to discuss Apple's Cube. > Objet : Re: [Cube] vrm > > > fred: > i was looking at apple g 4 cube, but nothing came up. thank you so > much!! > g > On Feb 12, 2008, at 12:49 AM, Fred Terry wrote: > >> Gladys, >> >> Two sellers have vrm boards listed on eBay for $59.00 and $29.00. >> You could >> buy one from http://welovemacs.com, but they are selling them for >> $169.00. >> >> HTH, >> pf >> >> > _______________________________________________ > Cube mailing list > Cube@listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube > _______________________________________________ > Cube mailing list > Cube@listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube >