[DuoList] On no - GLOD

[Britt Dodd]

Well, this happened on a vacation one time....

after doign the routine, i ended up seperating every part on a table for
overnight and still no power.
I actually had to swap the PMU with another one, and it fired rigth up, and
the odd thing is the old PMU still works now!

I actually have my 2400c in parts to install a G3 chip....

On 4/24/07, Rob Johnstone <rob.johnstone at internode.on.net> wrote:
>
> Hi All,
>
> Well I may have just learnt a difficult lesson - don't dabble.
>
> I removed the hard drive from my Powerbook 2400 with the intention of
> installing a compact flash card via a CF to IDE adaptor. In the first
> instance I had the wrong adaptor so I reassembled the Powerbook with
> the original hard drive. Upon switching on all I get is a green light.
>
> I've tried Sydney Ho's suggestion:
>
> GREEN LIGHT (constantly lit)
> 1. Disconnect AC
> 2. Pull Lion battery
> 3. Reconnect AC
> 4. Reset Power Manager button by depressing it for at least 40 seconds.
>
> No luck.
>
> This is very sad. Any ideas?
>
> Rob  :(
> _______________________________________________
> DuoList mailing list
> DuoList at listserver.themacintoshguy.com
> http://listserver.themacintoshguy.com/mailman/listinfo/duolist
>
> Listmom is trying to clean out his closets! Vintage Mac and random stuff:
>          http://search.ebay.com/_W0QQsassZmacguy1984
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listserver.themacintoshguy.com/pipermail/duolist/attachments/20070424/b256b82f/attachment.html