[G4] Re: G4 Digest, Vol 8, Issue 11

[shopdog]

Dick:

Thank you for the advice.  I may have to pull the whole tray out.  I 
will check out the web page and see if that gives me some more 
information.


On Apr 14, 2005, at 2:57 PM, Richard M. Kriss wrote:

> I don't recall any adhesive or hidden screws. You have to remover the 
> whole
> try and may have to pull your 120 GB drive.  The 20 should be held by 4
> screws on the side.
>
> Go to the OWC web page for a pictorial on how to
>
> dick
>
>
> On 4/14/05 1:15 PM, "g4-request at listserver.themacintoshguy.com"
> <g4-request at listserver.themacintoshguy.com> wrote:
>
>> I would now like to replace the original 20GB drive with another 120GB
>> Hitachi Deskstar internal drive that I purchased.  But I have run into
>> two problems/questions.  When I opened up my case, and removed the
>> 120GB IBM drive to get to the 20GB drive, I discovered that the 20GB
>> drive was not secured to the bracket by screws, but yet would not 
>> budge
>> when I tried to remove it.  I didn't want to pull on it too much.  Is
>> it held in place by adhesive, another screw, or is it just a little
>> tight?  Please advise me as to whether I can just pull harder to get
>> the drive out, or if there's something else I should do.
>
>
> _______________________________________________
> G4 mailing list
> G4 at listserver.themacintoshguy.com
> http://listserver.themacintoshguy.com/mailman/listinfo/g4
>
> Listmom is trying to clean out his closets! Vintage Mac and random 
> stuff:
>          http://search.ebay.com/_W0QQsassZmacguy1984