[X-Apps] Problem with Adaptec 2906 or Agfa ScanWise X

[Suzanne]

The scanner showing up eight times may be the problem...but the ids ARE set
correctly (5 and 6). After seeing so many emails about scanners and system
10.3 today, I decided to reboot into system 9. On my way there I saw that I
had backed up system 10.2 onto a hard drive and it came up as an option to
reboot into 10.2. I did and the scanner works just fine! This will be a pain
(like running quark in system 9 instead of classic) but it will put off the
purchase of a new firewire scanner for a bit...

suz


On 1/28/04 10:15 AM, "Steven Rogers" wrote:

> 
> On Jan 28, 2004, at 12:05 PM, Suzanne wrote:
> 
>> I have a REALLY weird thing going on in my system profile (I liked the
>> look of 10.2 better BTW). It shows under my scsi bus not two items (my
>> zip and my scanner) but my zip and my scanner 8 times!) I only had one
>> scanner in 10.2. The zip is set at 5 and the scanner at 6 but what are
>> all these LUN #s?
> 
> That would be the SCSI ID of the devices that it thinks are there. The
> two devices should have different IDs (there should be something on the
> device to set its ID) and neither of them should have ID zero. That
> might not be the problem, but its a start.
> 
> SR
> 
> 
> ----------
> Check out the Mac OS X email list FAQ
> http://www.themacintoshguy.com/lists/X.html
> 
> To unsubscribe, E-mail to: <X-Apps-off at lists.themacintoshguy.com>
> To switch to the DIGEST mode, E-mail to
> <X-Apps-digest at lists.themacintoshguy.com>
> Need help from a real person? Try.  <X-Apps-request at lists.themacintoshguy.com>
> 
> ----------
> $14.99 Unlimited Nationwide Mac Dialup and Mac Web Hosting from your Mac ISP
> Serious Mac Internet Solutions From NineWire!   http://macinternetaccess.com
> 
> DVIator   | Run Dual ADC displays on your G4 or just one on an older Mac!
> Dr. Bott  | <http://www.drbott.com/prod/DVIator.html>
> 
>  Support   | Support this list by clicking here before you buy!
> this List  |  http://www.themacintoshguy.com/support.html
>