Hi I have been using the ATA Hi-Cap Installer for years in my Cube with no problems. I am using a 320 GB Seagate drive with one 127,9 GB partition and one 170 GB partition. Joel 20 jul 2007 kl. 17.09 skrev Stefan: >> Hi >> >> I use that software from Intech. It works great gives me access to >> 320 GB internal IDE drive, but the only problem I didn't foresee >> is when connecting the cube as a FW disk to another mac, it will >> not be able to access anything past the 128 GB, EVEN IF the other >> mac loads the Intech driver... so its a small limitation to be >> aware of. >> Francois > > Hi Francois, > > > I read your posting. > > Some years ago I installed the Intech-driver for a while but found > it instable then. > And I was concerned for my data. > Now you brought back my interest. :-) > > Do you have experiences with situations when you had to repair your > (large!) harddisk > by booting in root-mode or with harddisk-toolkit (original Apple or > other) when starting from a connected firewire-drive? (I don't mean > target-mode!) > Does the 128 GB-limit exist in that case too? > > That's what moves my mind. > > Or are there any other problems to mention? > I hope you will tell us everything of importance? > > > Thanks for answering in advance > Stefan > > _______________________________________________ > Cube mailing list > Cube at listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/cube