[Duo2400] Re: 2400c G3 Card questions
gionpeters at comcast.net
gionpeters at comcast.net
Thu Dec 25 14:53:27 PST 2003
How do you tell if a capacitor is toast ?
Whatever the case, let us know how it goes.
Mad Dog
> Bah.
>
> I put the G4 thermal paste on the die of the G3, and made it thick enough to
> contact the heat pad inside the PowerBook's case. Installed it, it booted
> twice (locking up both times), and the proceeded to create a GLOD. I
> swapped the card out, booted, then back in; got it to boot one more time,
> again locking up during boot.
>
> The machine works fine with the stock 603e 180Mhz processor installed, but
> only give me a GLOD with the G3 installed now. I've done a simple
> continuity test of the components on the card, and it looks like 6-10 of the
> surface mount resistors and capacitors are toast.
>
> I'm sure I shorted it out during one of the installs. I'm not in the mood
> to do more extensive testing of the parts, or try to track down replacements
> right now. If I decide to attempt to actually repair the card, I'll let the
> list know how it goes.
>
> I should call up some of the old Newer Tech engineers that I know and see if
> they can repair the card. :D
>
> Thanks all,
>
> On 12/24/03 3:35 PM, "Chuck Kenney" <kenneyc at mac.com> wrote:
>
> > I just received a Newer Tech Nupowr G3 240 for the 2400c from another list
> > member (thanks!), and have a few questions.
> >
> > The card has a lot of thermal paste/grease on it as I received it. I know
> > that making a new layer is usually best for thermal transfer. Do I need to
> > apply thermal grease only on the G3 die itself, or across the entire block
> > it is in, as well? I'll be using the same stuff that Apple uses for the
> > G4s, if it makes a difference.
>
> --
> Chuck Kenney
> http://kenneyc.freefallsoftware.com/
>
>
>
> ----------
> Duo/2400 List, The friendliest place on the Net!
> A listserv for users and fans of Mac subportables.
> FAQ at <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml>
> Be sure to visit Mac2400! <http://www.sineware.com/mac2400>
>
> To unsubscribe, E-mail to: <DuoList-off at lists.themacintoshguy.com>
> To switch to the DIGEST mode, E-mail to
> <DuoList-digest at lists.themacintoshguy.com>
> Need help from a real person? Try. <DuoList-request at lists.themacintoshguy.com>
>
> ----------
> Dr. Bott | 10/100 Ethernet for your 2400 is finally here!
> MPC-100 | <http://www.drbott.com/prod/mpc100.html>
>
> RoadTools $30 PodiumPad available at Apple retail stores, $20 Traveler
> CoolPad at Staples. Both in white for iBooks at <http://roadtools.com>
>
> Midwest Mac Parts ][ <http://www.midwestmac.com>
> After-market parts for Macs. ][ 888-356-1104 ][
>
> MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879!
> Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>
More information about the DuoList
mailing list