[DuoList] LCD Brightness on 2400

[Sergio Tani]

The cheaper way is to replace the backlight but a little experience is needed
I did it with a powerbook 1400 LCD lamp (a bit longer but it fits)
Someone in the list bought the lamp from digikey  www.digikey.com (2mmx218mm ccfl)

Here's an extract from an old post by Donald McCaig:
"One lamp. Very fragile, needs to be soldered at both ends.
Disassembling the screen is fairly straight-forward and you needn't open
the computer. Just unscrew the four screws in the case (see diagram in
repair manual) and set to. The lamp's under the inverter board, the last
thing to be disassembled."

Sergio
---

On Giovedì, 19 maggio 2005 21:31, Leigh Seaver <keeleefeefee at mac.com> wrote:
>I recently acquired a nice PB2400 which has no dead pixels, but
>the backlight is not as bright as others I'm using.  What is
>the best way to correct this?  New screen?  Replace the backlight?  If so, how to do it?
>_______________________________________________
>DuoList mailing list
>DuoList at listserver.themacintoshguy.com
>http://listserver.themacintoshguy.com/mailman/listinfo/duolist
>
>Listmom is trying to clean out his closets! Vintage Mac and random stuff:
>         http://search.ebay.com/_W0QQsassZmacguy1984
>