[DuoList] 2300 and cf card.

[Richard Bennet]

Hi - are you saying that you run the (specific &
appropriate) IDE ribbon cable thru a seam to the
outside of the case, then convert that to a CF reader?
COOL.
1) Where can I get the IDE cable?
2) what other parts did you need?

Teach me, Obi Wen!

Rich Bennet
--- "VICTORIA.DUGGAN" <victoria.duggan at ntlworld.com>
wrote:

> 	Hi all
> 
> Just a quick update on the above . I finally got the
> duo 2300 to run  
> perfect from a cf card in the cf to ide adapter
> connected direct to  
> the ide connector. It will only run if i have a
> drive connected to  
> the scsi connector as well ( can be spun down). When
> all this was  
> done i decided to see if i could run a cf wifi card,
> The one i tried  
> is a WISGO cf wifi card and it will not be seen by
> the mac all i get  
> is the do you want to erase the drive box on start
> up.
> but i will keep trying.
> 
> I will send an update later in the week when the
> next card i have  
> bought turns up. Also i must report that booting
> from cf with the  
> scsi hdd turned off give a battery time of 2 hrs 55
> mins on a regular  
> use . This battery normally give 1 hr 30 mins
> running the other drive  
> so vast improvement there, also the duo is whisper
> quiet now.
> 
> 
> vicki 
> _______________________________________________
> DuoList mailing list
> DuoList at listserver.themacintoshguy.com
>
http://listserver.themacintoshguy.com/mailman/listinfo/duolist
> 
> Listmom is trying to clean out his closets! Vintage
> Mac and random stuff:
>          http://search.ebay.com/_W0QQsassZmacguy1984
>