I've read so many things on the net about people replacing their motherboard when they have a similar Firewire issue, it then works for awhile and then goes bad again. Can you recommend a PCI card? I was thinking Belkin. On Nov 21, 2003, at 12:14 PM, support at fwdepot wrote: > If you have done all the steps you listed, then it is a hardware > failure and > the ports are dead - if it was a software issue, then resetting the > open > firmware would have brought them back > > > Time for a FireWire PCI card.... > > >> I'm new to the list and I'm sure that this question has probably been >> asked over and over. Does anyone know for sure why the built-in >> firewire ports on G4's just stop working? Is it a hardware or >> software >> issue? >> >> I've kept up with the OS updates for 10.2 (I have not loaded Panther >> on >> the machine yet) >> I've reset the PRAM >> I've reset Power Management >> I've reset the Firmware >> >> I have a G4 Quicksilver (Dual 1GHz) >> >> Thanks, >> >> >> ---------- >> MacFireWireTalk list, a listserv for discussion of FireWire on >> Macintosh. >> FAQ at <http://www.themacintoshguy.com/lists/FireWireFAQ.shtml>. >> >> ADS Tech.| PYRO Drive Kit: convert your drive to firewire! >> Dr. Bott | Now $169.00 <http://www.drbott.com/prod/ADS.html> >> >> Cyberian | Support this list when you buy at Outpost.com! >> Outpost | http://www.themacintoshguy.com/outpost.shtml >> >> FireWire | 2.5" and 3.5" FireWire hard disk enclosures >> Depot | starting at $95!! <http://www.fwdepot.com> >> >> > > > ---------- > MacFireWireTalk list, a listserv for discussion of FireWire on > Macintosh. > FAQ at <http://www.themacintoshguy.com/lists/FireWireFAQ.shtml>. > > ADS Tech.| PYRO Drive Kit: convert your drive to firewire! > Dr. Bott | Now $169.00 <http://www.drbott.com/prod/ADS.html> > > Cyberian | Support this list when you buy at Outpost.com! > Outpost | http://www.themacintoshguy.com/outpost.shtml > > FireWire | 2.5" and 3.5" FireWire hard disk enclosures > Depot | starting at $95!! <http://www.fwdepot.com> >