I would think you would know better than to use Adaptec. There don't work for high end through put. Get youself a real SCSI card. Doyle ----- Original Message ----- From: "Judy Antipin" <jlap at comcast.net> To: "Power Macintosh G4 List" <G4 at lists.themacintoshguy.com> Sent: Friday, March 14, 2003 10:30 PM Subject: [G4] problem capturing video or copying large files to SCSI hard drive > > I'm pretty sure this is a hardware issue, since at least part of it > occurs in OS 9 as well as in OSX, but I've found no mention of it in > other forums. > I have a G4 933, bought last February, that I use for video, graphics, > web and other mutimedia work. I'm running OS 10.2.4 (this problem > existed before the system upgrades.) The IDE 60G internal hard drive has > four partitions: OSX system (smaller partition), applications, internet > (web developement, browsers) and the largest partition which I use for > video clips and the OS 9 system folder. Working between these partitions > is no problem. > > I also have an Adaptec 29160N SCSI controller card which hosts a Fujitsu > MAF3364L SUN36G 10,000 rpm scsi drive that I would like to use as my > capture drive, but that has not worked very well. I'm using Premiere 6.5 > as the capture software. I have no problem using the drive as a scratch > drive, and for video and audio preview files, but if I try to capture > beyond 10,000 frames (about 5 minutes/400 mb) the capture freezes, I get > the spining beachball of death, the app turns red in the force quit > panel, and I end up having to restart, because it causes the finder to > go into spasms also. If I trash the premiere pref and plist files after > restarting, I can capture again safely if I keep it under 3 or 4 minutes > MAYBE. I have no problem capturing to the large partition on the IDE drive. > > I get a similar problem if I try to copy files over 400 mb to the scsi > drive, and that happens whether I'm booted into OSX or 9.2.2. The copy > proceeds about halfway through, then the beachball, etc. In 9.2.2 the > whole system freezes. I'm using the latest software drivers/versions for > the system, the controller card and Adobe Premiere. I have factory > default settings on the hard drive. I have a second IBM 15,000 rpm SCSI > drive that I wanted to add to the scsi conroller bus, but I'm holding > off until I figure out what's going on. Any suggestions on cause and/or > cure appreciated. > > Thank you, > > Judy Antipin > > > > **************************************************************************** ****** > Best Prices for All Telecommnications Needs at http://www.jlaproductions.com > **************************************************************************** ****** > Tech support 24/7 for computers, peripherals, software at http://jlapro.juvio.com > **************************************************************************** ****** > For Brand Name Vitamins at Discount Prices visit http://www.ForMoreGoodHealth.com > **************************************************************************** ****** > > > > > ---------- > G4ist, a listserv for discussion of everything G4. > FAQ at <http://www.themacintoshguy.com/lists/G4.html>. > Send a message to <G4-DIGEST at themacintoshguy.com> to switch to the digest. > > XRouter | Share your DSL or cable modem between multiple computers! > Dr. Bott | Now $139.99 <http://www.drbott.com/prod/xrouter.html> > > Dr. Bott LLC 4-port USB Hub in translucent Graphite! > Dr. Bott LLC <http://www.drbott.com/prod/ghub.html> > > Small Dog Electronics http://www.smalldog.com | Canon Digital Cameras | > --Quicksilver & refurbished G4's arriving daily! | and Camcorders!! | > > MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! > Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com> > > OS X News, Dr.Mac, Forums, Tutorials, Tips, Hints, FAQ?s - http://www.osxfaq.com > >