[G4] Have I gone too far for a G4?

[B G]

99% of the drive will read as master if not jumpered,

You cannot have two masters on the same cable.

It will only read the first one.

Yuo must set the jumpers either to cable select or master / salce

BG

On Apr 10, 2009, at 5:25 PM, Thomas Brooks wrote:

> Recently I was able to get a 320GB WD SATA drive and a Macsense SATA/ 
> IDE Combo PCI card for a good price.
>
> I now have the 320GB connected to the internal SATA port and a 250GB  
> and 160GB ATA HDS's connected to the internal Ultra ATA 133 port on  
> the card.
>
> Although the 320 MB HD seems to be working fine and <About this Mac>  
> sees it and the 250GB HD it does not see the 160GB HD on the same  
> ultra ATA  cable as the 250GB.
>
> There are no jumpers in place on either the 250GB or 160GB.
>
> Before I installed the 250GB internally I was using it in a firewire  
> enclosure as an external bootable HD.
>
> In the Startup Disk panel of System Preferences only the 320GB disk  
> shows up.
>
> Before I reinstall the Hard Drives, PCI Card and OS if necessary do  
> any of you have any ideas?
>
> There is no practical reason for this arrangement--I just like to  
> tinker.
>
> Tom Brooks
>
> I am running OSX 10.5.6 on a Sawtooth G4 AGP.
> 1.2 GHz processor upgrade
> 2GB Ram
> 430 Watt ATX P/S
>
>
> _______________________________________________
> G4 mailing list
> G4 at listserver.themacintoshguy.com
> http://listserver.themacintoshguy.com/mailman/listinfo/g4