Hi Harry. Thanks for your message. I will try what you suggested and let you know. Thanks! Mike ---- Original message ---- >Date: Wed, 7 Dec 2011 09:47:24 -0800 >From: g4-bounces at listserver.themacintoshguy.com (on behalf of "Harry A. Freeman" <harry at gifutiger.com>) >Subject: Re: [G4] Leopard crashes >To: "A place to discuss Apple's G4 computers." <g4 at listserver.themacintoshguy.com> > >Greetings, > >I apologize, yesterday was a very busy day. >Second apology - I mistakenly exchanged my ACARD 6280M SATA interface >card for my Sonnet Technologies ATA-133 Tempo card. The Sonnet >Technologies ATA-133 Tempo is installed my G4 AGP Graphics platform, >which is out of service at present. > >However I've read that either Sonnet makes the ACARD SATA card or visa- >versa. > >My ACARD 6280M is installed in PCI slot #2 and I've never had any >problems. >I would suggest that if you have your Sonnet Technologies SATA card >installed in PCI slot #2 that you remove all other cards that are not >necessary for booting and see if that makes a difference. > >If boot goes Okay then replace 1/2 of the cards that you removed and >give it another try. > >If you experience problems again then remove 1/2 of the cards that >were replace and try again. > >Keep repeating the above steps until you have found the card that is >causing the problems. > >Once you have discovered the card causing the problem then try the >card in another slot if possible. >Some cards will not fit into all PCI slots because of their physical >size. > >Cheers > >Harry >San Jose, Ca > > > >On Dec 6, 2011, at 5:26 AM, Mikey wrote: > >> Harry, the Sonnet Sata card is rev 5.1.3 >> >> Whats yours? >> >> Mike >> ----- Original Message ----- From: "Harry Freeman" <harry at gifutiger.com >> > >> To: "A place to discuss Apple's G4 computers." <g4 at listserver.themacintoshguy.com >> > >> Cc: "A place to discuss Apple's G4 computers." <g4 at listserver.themacintoshguy.com >> > >> Sent: Monday, December 05, 2011 11:53 PM >> Subject: Re: [G4] Leopard crashes >> >> >>> I have a MDD 1Ghz dual and I'm using the Sonnet SATA controller and >>> I can boot from either a 500Gb or a 750Gb drive. >>> >>> What is the rev. Of your Sonnet SATA controller? >>> >>> Cheers >>> >>> Harry >>> San Jose Ca. >>> >>> Sent from my iPad >>> >>> On Dec 5, 2011, at 7:38 PM, "Mikey" <mikey1 at rcn.com> wrote: >>> >>>> I installed OSX on my G4 MDD with Dual 1ghz processor (apple) . >>>> Runs fine. >>>> >>>> I have a Sonnet SATA controller for the 500 gig Data Drive, but no >>>> matter what I tried, I could not get the machine to boot OFF the >>>> Sata drive....I have to keep the original 40 gig IDE drive in the >>>> machine with OSX as the boot drive. >>>> This drives me crazy. >>>> _______________________________________________ >>>> G4 mailing list >>>> G4 at listserver.themacintoshguy.com >>>> http://listserver.themacintoshguy.com/mailman/listinfo/g4 >>> _______________________________________________ >>> G4 mailing list >>> G4 at listserver.themacintoshguy.com >>> http://listserver.themacintoshguy.com/mailman/listinfo/g4 >> >> _______________________________________________ >> G4 mailing list >> G4 at listserver.themacintoshguy.com >> http://listserver.themacintoshguy.com/mailman/listinfo/g4 > >_______________________________________________ >G4 mailing list >G4 at listserver.themacintoshguy.com >http://listserver.themacintoshguy.com/mailman/listinfo/g4