Don't open the box! Take it back! That's the old 2x model. The DVR-105 is 4x2x DVD-RW plus 16x8x32x CD-RW. Whatever you do, don't keep the 104. You got ripped off! I can't believe they did that. You'rs is the first report of such bait and switch. Kunga On Saturday, January 4, 2003, at 09:11 AM, Steve Talkowski wrote: > Ok, I just got back from the Office Max in Brooklyn (quite a trek from > the East Village) > > I called before I departed and was told there were like two left. > When I get there, I'm comparing the product numbers mentioned from > here and the unit is NOT a DVR-105 but instead a DVR-104! I had them > verify the numbers and after closer inspection of the fine print in > the Office Max flyer, it indicates "Models may vary at different > locations", with two different model numbers. > > I went ahead and purchased it - Cendyne Part# CDICD00106 - here's the > relevant specs from the sticker on the back of the box: > > Type: Internal > Data Interface: E-IDE/ATAPI > Data Buffer Memory: 512KB(read), 2MB(write) > Sustained Transfer Rate: DVD-ROM: 2x-4x(2.7MB/s - 5.4MB/s Max) > CD-ROM: 10.3x-24x(1.5MB/s - 3.6MB/s Max) > Disc Format: DVD ROM & VIDEO (Single & Dual Layer), DVD-R, DVD-RW > (Note: DVD-RAM not supported), CD-R, CD-RW, CD-DA (Audio CD), CD-ROM > (Mode 1&2), CD-ROM XA, Video CD, Photo CD (Single and Multi-Session), > CD-EXTRA (CD PLUS), HYBRID CD, CD-Text > Access Time: DVD-ROM: 200ms (Typical) CD-ROM: 180ms (Typical) > System Requirements: Windows 98SE/Me/2000 Pro, etc. > Model Drive: Code DVR-104 > > Software included has "Manual for Nero Software" sticker apparently > replacing some other bundled software. > > **So my big question is, what are the differences between the DVR-104 > and DVR-105? Will the DVR-104 work in my 450 G4? Also, the Sustained > Transfer Rate of 2x-4x, does this truly mean 4x max burn speed?** > > If it doesn't work in my G4 I could install it in my custom built dual > Athlon PC - it's too good a deal to return, right? > > I'll await a few responses before breaking the plastic wrapping... > > Thanks all for the initial heads up and for keeping everyone informed > about this great deal, > > -Steve