[MacDV] Re: Print to Video [update]

[Francis Fitzpatrick]

I thought it was impossible to print photojpeg to tape from FCP, but I 
could be wrong. I think that when you save as a photjpeg file that you 
are saving each frame as a separate jpeg image, right? which creates a 
humongous size file in one folder. I hope this helps a bit - I've got 
to review FCP and DVDSP options before I can say more.
Frank Fitzpatrick

On Apr 11, 2006, at 9:15 PM, Brett Conlon wrote:

> This helps me with an issue I was experiencing recently but wasn't 
> able to
> sort it out.
>
> Could someone help me with the following process and steer me in the 
> right
> direction?
>
> =====================================
> To make a photo slideshow in FCPro I dragged all my pics in (TIFFs 
> saved
> at 720x576/PAL) and laid them out in the timeline, fitting to audio.
>
> Created a cross fade between slide 1 and 2 and copied it. Then pasted 
> it
> between all other slides. (perhaps there was a quicker way).
>
> Saved as QuickTime PhotoJPEG movie. This was because I just simply
> couldn't get full resolution pictures saving it as a FCMovie.
>
> But as per this thread, when I tried to print to my tape I just got the
> audio and a black screen.
> =====================================
>
> So, I'll try resaving the QT PhotoJPEG movie as DV (hopefully keeping 
> the
> resolution clean) and try print to movie again.
>
> I emailed this group a few months ago with a question about DVD Studio
> Pro's slideshows giving poor resolution results and what best size to 
> save
> images at (if resaving is recommended at all) but I received no 
> replies.
> This is why I turned to FCPro to create the slideshow.
>
> Your comments are most appreciated.
>
> Cheers,
>
> Coj
>
>
>
>
>
> sb <videovideo at mac.com>
> Sent by: macdv-bounces at listserver.themacintoshguy.com
> 12/04/06 04:40 AM
> Please respond to
> "A place to discuss digital video on Macintosh."
> <macdv at listserver.themacintoshguy.com>
>
>
> To
> "A place to discuss digital video on Macintosh."
> <macdv at listserver.themacintoshguy.com>
> cc
>
> Subject
> [MacDV] Re:  Print to Video [update]
>
>
>
>
>
>
> Jill, you've kind of screwed it up by using the MotionJpegA codec.
>
> Create a new Sequence. Then use CMD-Zero to check the sequence 
> settings.
> Make sure the codec used is DV-NTSC, NOT MotionJPEG.
> Now place all your clips into this sequence. Save.
> You should be able to use Print to Video.
> If you need to see screenshots, email me off list.
>
>  regards,
>
>  sb
>
>
>
> _______________________________________________
> MacDV mailing list
> MacDV at listserver.themacintoshguy.com
> http://listserver.themacintoshguy.com/mailman/listinfo/macdv
>
> Listmom is trying to clean out his closets! Vintage Mac and random 
> stuff:
>          http://search.ebay.com/_W0QQsassZmacguy1984
>