[MV] Using the DS2 with macspeech

[richard proctor]

on 20/11/05 15:20, Chuck Rogers at thechuck at mac.com wrote:

> Richard:
> 
> You can't hook the DS-2 directly to the sound input on your computer
> because that is a LINE IN, not MIC IN. The difference in signal
> strength makes it unusable for a direct connection.
> 
> I got very good results from the DS-2 by just creating a new profile
> with the mic I normally use, then transcribing from the DS-2 and
> making Corrections. It only took a few sessions to get accuracy above
> 92% (which is pretty good for transcribing from recorded files).
> 
> Best Regards,
> 
> Chuck Rogers
> 


Thanks for that Chuck

It's going via imic so I can go from the 'ear' input on the DS2 (audio to
audio) and it works fine, I connected it using the DM1 instructions, well,
kind of!

got a bit of training to do but it looks like it'll be well workable

thanks for your help

   rp