thanks for the reply. which linksys card do you have? and do you find your reception to be much improved? thanks, eric On Mar 4, 2005, at 12:43 AM, rob morris wrote: >> From: Robert Ameeti <robert at ameeti.net> >> Subject: Re: [Ti] Wireless card >> >>> i just borrowed a buffalo wifi card to see if wireless reception is >>> better >>> (or how much better) with the external card as opposed to the >>> airport extreme >>> card. >> >> Do note that there are 2 conversations going on here. One is for WiFi >> as you >> are doing. The other is for cellular wireless cards. >> >>> the card is recognized, it shows up in my menu. my question is how to >>> activate it - how do i tell the computer to use this card rather >>> than the >>> airport extrme card. can you switch back and forth between the cards? >> >> You can't easily switch back and forth as the internal card will want >> to >> always load. What you are wanting to do is not really feasible or >> worth the >> effort based on my similar attempts. > > With a buffalo card no, you can't. You have to pull the airport card. > > But with a Linksys and some other wireless cards, you do not have to > pull > the airport card to make the other card work. Once the new PCMCIA > wireless > card is recognized, I just turn off the airport card in the menu bar, > and > then the linksys card I use works fine. I use the Linksys card to > extended > range when out and about or I have a bit weaker connection with the > internal > airport card. > Cheers > > > > > _______________________________________________ > Titanium mailing list > Titanium at listserver.themacintoshguy.com > http://listserver.themacintoshguy.com/mailman/listinfo/titanium > > Listmom is trying to clean out his closets! Vintage Mac and random > stuff: > http://search.ebay.com/_W0QQsassZmacguy1984 >