[G4] double monitors requirements

[stefan moller]

hi!

what is required to connect two screen monitors to my old quicksilver ?

   Machine Model:	Power Mac G4
   CPU Type:	PowerPC G4  (2.1)
   Number Of CPUs:	1
   CPU Speed:	800 MHz
   L2 Cache (per CPU):	256 KB
   Memory:	1 GB
   Bus Speed:	133 MHz
   Boot ROM Version:	4.3.3f2



In system profiler under PCI/AGP Cards I find this:

pci11af,eeb0:

   Type:	Other Multimedia
   Bus:	PCI
   Slot:	SLOT-3
   Vendor ID:	0x1057
   Device ID:	0x1801
   Subsystem Vendor ID:	0x11af
   Subsystem ID:	0xeeb0
   Revision ID:	0x0003



  ATY,RV200:

   Type:	display
   Bus:	AGP
   Slot:	SLOT-1
   VRAM (Total):	32 MB
   Vendor:	ATI (0x1002)
   Device ID:	0x5157
   Revision ID:	0x0000
   ROM Revision:	113-91701-222

Display:

   Type:	display
   Display Type:	CRT
   VRAM (In Use):	32 MB
   Resolution:	1024 x 768 @ 75 Hz
   Depth:	16-bit Color
   Main Display:	Yes
   Mirror:	Off
   Online:	Yes

ATY,BlueStone_B:

   Status:	No display connected

So the first question is how do I physically connect two monitors?

do I have to swap the PCI Graphics card or can I split the signal via a 
"split signal adaptor/connector".

second question is how do I configure the software to set this up ?

/stefan



-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 1939 bytes
Desc: not available
URL: <http://listserver.themacintoshguy.com/pipermail/g4/attachments/20100304/baee56c3/attachment.bin>