The Cendyne 4x internal DV-R/RW drive is today (2/5) priced at close to $300 with no rebate at the Staples website. I ordered one on 1/30 at the lower price (including a rebate), they accepted the order, but today, when I called to ask about its status, I was told that it had been out of stock when I placed order and they had neglected to tell me at the time. BobLL Thubten Kunga wrote: > To answer your questions: No and Yes. You forgot to tell us which G4 > tower 1999-2002 single 5.25" optical or the late 2002 MDD dual 5.25" > optical model? > > Forget about using Pioneer DVD-RW drives outside your tower if you want > to work with iDVD 3. Remove it from the case, which you can recycle > with the optical drive you take out of an older tower or a large hard > drive, and put it in as a MASTER drive while making the other MDD > optical SLAVE (if appropriate). This will take you at most 5 minutes. > Then buy iLife, install iDVD 3 and you will be good to go. Make sure > you have installed the firmware patch for DVR-103 and DVR-104 drives to > prevent burning them up if you use 4x rated media. > > For those of you who haven't heard Pioneer DVR-105 4x burners go on > sale a lot at Staples and Office Max for $200 or less after rebates > hidden in a Maroon and Gold lettered white box labeled Cendyne (brand) > 4x DVD-R/RW. You will see the model DVR-105 mentioned at the bottom of > the spec list on the back of the box just above the bar codes. The 105 > (vs. A05) means it is missing the words "pioneer" on the faceplate. > > You can also retrofit two 5.25" optical in any Mac Tower since 1999. I > have a DVD-RAM drive and the 105 inside my old B&W with a PowerLogix G4 > Zif running @550 MHz processor upgrade and iDVD 3. > > k > > On Wednesday, February 5, 2003, at 09:20 AM, Brendan Perreault wrote: > > > What if it was an internal drive put inside one of those Firewire case > > kits? > > > > on 2/5/03 10:12 AM, Erica Sadun at erica at mindspring.com wrote: > > > >> At 9:08 AM -0600 2/5/03, Alan Lanning wrote: > >>> Apparently this burner is the same as Apple is putting into its new > >>> machines but is not recognized by iDVD when configured as an > >>> external drive. Two questions: does anyone know of a code patch to > >>> make iDVD work with the external burner and is it possible (easy) to > >>> remove the drive from the external case and mount it into my G4 > >>> tower? I have the EZQuest branded Poneer DVD. > >>> Thanks > >> > >> iDVD doesn't "do" external drives. > >> > >> -- Erica > > ---------- > <http://www.themacintoshguy.com/lists/MacDV.html>. > Send a message to <MacDV-DIGEST at themacintoshguy.com> to switch to the digest version. > > XRouter | Share your DSL or cable modem between multiple computers! > Dr. Bott | Now $139.99 <http://www.drbott.com/prod/xrouter.html> > > Cyberian | Support this list when you buy at Outpost.com! > Outpost | http://www.themacintoshguy.com/outpost.shtml > > MacResQ Specials: LaCie SCSI CDR From $99! PowerBook 3400/200 Only $879! > Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com>