[Ti] What size screwdriver is necessary for opening the memory area?

[John]

> The PB17 .pdf manual available at www.apple.com/support/powerbook,
> p.54, says 00. (The PB15 manual says 00 for its different memory
> access, but before I read that I used what I believe is a 000,
> specifically the nest-to-smallest in the useful Radio Shack $7.95
> 6-driver phillips set (two labeled #1, four labeled #0, each a
> different size).)
>
> On Tue, 29 Jun 2004, Robert Ameeti wrote:
>
>> Does anyone know what size phillips screwdriver is necessary for
> accessing the memory compartment of the 17" PowerBook?  It must be
> either a 0, 00, 000, or a 0000 but they all are pretty close in
> size yet I want to purchase the correct one from a catalog.

If you are in the USA, and have a Home Depot nearby, they have a COOL 8 
bit torx and another 8 bit Phillips/slotted set, with the sizes you 
need for any Ti/Al book repair. They sell them by the checkout stands - 
not all Home Depot's may carry them. I don't know if the Albook needs a 
socket t disassemble anything, however.