[Ti] Can't get Mac to go wireless (Platinum Powerbook 1g mem)

[m_flynn at comcast.net]

Yup, That is how it is set now but still not working.

Thanks for your help Scott.

-------------- Original message -------------- 
From: Scott Strehlow <strehlow at usermail.com> 

> Mike, 
> 
> > Could not find were to change from g to b. 
> 
> Assuming you have similar software in your router to mine, it is on 
> the "Channel and SSID" page. It is the "Wireless Mode" choice. Of 
> course they don't mention "b" but the auto setting will cover it. 
> 
> Wireless Channel > 11 Works well unless there is another 
> network nearby on that channel. This is the default for most devices. 
> SSID > 
> Wireless Mode > 54g Auto 
> Broadcast SSID > Checking this will _slightly_ decrease 
> the 
> security of you network but makes connecting new devices much 
> easier. Start with it checked. 
> You can uncheck it later 
> when you have everything working. I 
> leave mine checked. Turning off broadcast will just slow someone 
> down when looking for a 
> network. With the right software, 
> this can be determined by eavesdropping long enough. 
> Cheers, 
> 
> Scott 
> 
> 
> _______________________________________________ 
> Titanium mailing list 
> Titanium at listserver.themacintoshguy.com 
> http://listserver.themacintoshguy.com/mailman/listinfo/titanium 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://listserver.themacintoshguy.com/pipermail/titanium/attachments/20080317/17b20e27/attachment-0001.html