[CUBE] Would a Cube boot with no screen connected (under OS9)

[kevin at 216websolutions.com]

He may have been referring to my post, in which I said that I needed to 
attach a monitor cable converter to fool my OS8.x box into thinking it 
had a monitor attached. If I recall correctly, this was needed not to 
boot, but to be able to export a display via Timbuktu. It was a Q650, 
which came with two video ports, and the converter was connected to the 
video card, not the onboard port.

>>>>>>>>>>>>>>>>>> Original Message <<<<<<<<<<<<<<<<<<

On 2/23/04, 11:36:31 AM, macjedi at mac.com wrote regarding Re: [CUBE] Would 
a Cube boot with no screen connected (under OS9):


> On 2/23/04 at 9:39 AM, George Pepper <pep27 at mac.com> did send into the 
ether:

> > Now you've clouded the issue again... Are said G4's running OS 9?... If
> > so, do they have the box that it is said is required to "fool" OS 9
> > into thinking that a monitor is attached?...

> What little box is that? There is nothing hooked up to the G4's video 
card.

> > Finally, is it a Server version of OS 9 you are running? ;^)...

> No, straight OS 9.2.2.

> chris

> ----------
> Check out the Cube email list FAQ
> http://www.themacintoshguy.com/lists/Cube.html

> To unsubscribe, E-mail to: <Cube-off at lists.themacintoshguy.com>
> To switch to the DIGEST mode, E-mail to 
<Cube-digest at lists.themacintoshguy.com>
> Need help from a real person? Try.  
<Cube-request at lists.themacintoshguy.com>

> ----------
> $14.99 Unlimited Nationwide Mac Dialup and Mac Web Hosting from your Mac 
ISP
> Serious Mac Internet Solutions From NineWire!   
http://macinternetaccess.com

>  T3Hub  |  3 Port USB Hub weighs less than an ounce!
> Dr. Bott|   <http://www.drbott.com/prod/T3Hub.html>

>    Cyberian   | Support this list when you buy at Outpost.com!
>    Outpost    | http://www.themacintoshguy.com/outpost.shtml

> ADC Extension | Extend the built in cable of your flat panel by 10 ft.
>   Dr. Bott    |    <http://www.drbott.com/prod/ADCExtension.html>