Thanks for the input Ben! 1) There are no Nubus cards installed in either Duo Dock. 2) The bus connector on the Duo 2300c looks OK from the outside. 3) There are SCSI terminators in both Duo Docks. Unfortunately, I don't have a CD-ROM drive to try out. I may have to take apart the Duo 2300C and check the solder connections to the bus connector (I'm a little wary of doing that, but I just replaced the PRAM battery, so at least I know I can get it apart and back together again!) --- Ben Smith <ben.smith at qm-systems.com> wrote: > > > > -----Original Message----- > > From: Duo/2400 List > [mailto:DuoList at lists.themacintoshguy.com]On Behalf > > Of Art Rice > > Sent: Friday, July 18, 2003 4:16 PM > > To: Duo/2400 List > > Subject: [Duo2400] Re: 2300C won't boot in Duo > Dock or Duo Dock > > Plus-Need more help! > > > > > > Thanks for the tips, but I still get the same > error > > after removing the FPU in the Duo Dock. There is > no > > SIMM in the VRAM expansion socket. I looked in the > Duo > > Dock Plus and there are no sockets for FPU or > VRAM. > > I'm afraid I may have a problem in the Duo 2300C > that > > is making it not communicate with the Duo Dock. > > Does anyone have any more ideas? > <SNIP> > The FPU and Vram should not be a problem, my 2300 > works with them > (DuoDock2), the only things that leap to mind are > 1) is there anything plugged into the NuBus slot? > 2) it the connector damaged in any way ? a bent or > missing pin could cause a > problem. > I think you said earlier that there is no HDD in the > dock, however can you > hook a CD up to it and try booting from the CD ? > Also if the dock has had a hard drive in the past > then you may have a > termination problem, I think that some dock's came > with a terminator plugged > into the SCSI connector on the board, if this is > missing, or if there is a > SCSI cable connected (without a terminated device on > the end) then that may > be the problem, > other than the above I cannot think of anything else > at the moment. > Ben. > > > ---------- > Duo/2400 List, The friendliest place on the Net! > A listserv for users and fans of Mac subportables. > FAQ at > <http://www.themacintoshguy.com/lists/DuoListFAQ.shtml> > Be sure to visit Mac2400! > <http://www.sineware.com/mac2400> > > To unsubscribe, E-mail to: > <DuoList-off at lists.themacintoshguy.com> > To switch to the DIGEST mode, E-mail to > <DuoList-digest at lists.themacintoshguy.com> > Need help from a real person? Try. > <DuoList-request at lists.themacintoshguy.com> > > ---------- > Dr. Bott | 10/100 Ethernet for your 2400 is finally > here! > MPC-100 | <http://www.drbott.com/prod/mpc100.html> > > RoadTools $30 PodiumPad available at Apple retail > stores, $20 Traveler > CoolPad at Staples. Both in white for iBooks at > <http://roadtools.com> > > Midwest Mac Parts ][ <http://www.midwestmac.com> > After-market parts for Macs. ][ 888-356-1104 ][ > > MacResQ Specials: LaCie SCSI CDR From $99! PowerBook > 3400/200 Only $879! > Norton AntiVirus 6 Only $19! We Stock PARTS! <http://www.macresq.com> __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com