Greetings, I tried the PCI video card from my G3, but there was still no picture. I have zapped the PRAM, and tried a different battery. Any other suggestions? Lee Though the system has an AGP slot, you can put a PCI video card in, such as the one in that G3 system. If you can make that work, but the AGP card won't work even after you reseat it, then definitely look into replacement cards. Look for anything that's Mac-compatible and AGP 4X compatible, and be sure to read reports on xlr8yourmac.com to make sure there are no issues with a given card and that model of Power Mac. Seems like there was some fairly modern card that didn't like Digital Audios (I bought a Radeon 9800 for my own DA). Eric On Thu, 2007-10-11 at 19:04 -0500, Lee Strosch wrote: >* Greetings, *>* I just acquired a G4 Digital Audio that has no video. It starts up *>* with the chime, but nothing shows on a monitor. I have tried two *>* different VGA monitors (both work with a G3 B&W). Any suggestions as *>* what the problem might be and any solutions. I don't know how much *>* RAM, all three slots have RAM installed. *>* *>* Thanks, *>* Lee* -------------- next part -------------- An HTML attachment was scrubbed... URL: http://listserver.themacintoshguy.com/pipermail/g4/attachments/20071013/9751ca6b/attachment.html