On Tue, 27 Apr 2004, Richard McKay wrote: > Am 26/4/04 11:40 pm schrieb "Brian" unter <briang113 at pacbell.net>: > > I would also tip to the new ram module as well as the first culprit. The > original poster did not mention if they had tried to reboot without the new > ram module? Only that they had removed it... I've tried it with and without the new module and as well as the old module. At the moment I can hear both the hard disk and the cd drive spin up and then spin down repeatedly. One thing I could try is replacing the hard disk, but I don't think I would like to try that at the moment. Does anyone one know where I could get this done in London, England...? > The check with a second hard drive is a good one to see if it will boot into > target mode. I don't have a second Mac to try this with... > Did you use sufficient anti-static measures when inserting the Airport card > and new memory? This could have caused some damage if you were unaware of > this or chose to ignore it? As far as I know I did... > Have you tried resetting the PRAM as well? Yes. Joel