[HM] Epson printer won't print after upgrade to 10.3

[Brian Olesky]

If you've already checked out the troubleshooting area in the manual that
came with the printer, and also on Epson's Web site, you might just Google
the problem. For example you might try: Epson RX600 printing problem

Hope this helps.
Brian
 


On 8/22/06 9:52 AM, "janesprando at comcast.net" <janesprando at comcast.net>
wrote:

> I inserted a new ink cartridge and it still the printing will still not start.
> 
> --
> Jane
> 
> -------------- Original message ----------------------
> From: janesprando at comcast.net
>> No, Brian, but I wil now! <G>
>> 
>> It says Black ink is low. Could that be the culprit? It did print a nozzle
>> check 
>> OK.
>> 
>> --
>> Jane
>> 
>>  -------------- Original message ----------------------
>> From: Brian Olesky <brian4 at sbcglobal.net>
>>> A lot of times, with Epson printers, Printer Stopped can be due to the paper
>>> not inserted correctly, or a cartridge low or out of ink, etc. Have you
>>> checked all these usual suspects?
>>>